The different structure of the Trigger Spray nozzle will result in different processing efficiencies and nozzle life, and a reasonable nozzle structure will enable the abrasive to achieve high speed, thereby increasing the processing efficiency and reducing the cost. From the advent of the nozzle to a long period of time afterwards, cylindrical nozzle structures were used. So far, nozzle structures have been developed at home and abroad in a variety of forms. Materials having different properties are designed at the nozzle inlet, outlet and intermediate portions, and the various materials are assembled into nozzles in a mechanical combination.
Place of original
Jiangyin Jiangsu China
28/400 28/410 28/415 or custom
New PP with SUS 304 H Spring inside
no leakage ,spray/stream/off
28/410 28/415 28/400 28/ratchet
Strong carton packing suitable for long-distance transport
a) Corrosion and wear: The material on the surface of the Trigger Spray nozzle and the inner flow passage gradually becomes larger or deformed, which in turn affects the flow, pressure and spray shape.
b) Corrosion: The chemical action of the spray liquid or the environment causes corrosion to damage the nozzle material.
c) Blockage: Dirt or other impurities in the liquid block the mouth of the nozzle, thus limiting the flow of the nozzle and disturbing the shape of the spray and its uniformity.
d) Bonding: Splash, mist or chemical build-up on the inside or outside material of the edge of the nozzle by evaporation of the liquid, leaving a dry solidified layer, blocking the nozzle opening or the inflow channel.